Office ：No.319, Jiefang Avenue, Qiaokou District, Wuhan City, Hubei Province, P.R.China.
C68 Indoor dead gloss low temperature matting agent
A new matting agent can replace B68
C68 indoor matting hardener is a kind of macromolecule material,1 part of C68 will react with 3 parts of epoxy resin,the greatest advantages are:1.it can get matting effect with low curing temperature;2.the gloss unchanged when curing with both low temperature and high temperature,good mechanical properties.
1. Technical Parameters
White powder ( Visual )
Volatile content [%]
2. Product Features
● It can get matting effect when curing with low-temperature.Curing with 150℃,gloss is 1.8%. C68 is not only matting agent but also can curing with low temperature, this is the greatest advantages.
● The gloss is insensitive to curing temperature, it will stay the same when below three conditions: 1.curing temperature is 150℃ or 200℃; 2.cold oven or hot oven; 3.drying rooms or drying tunnel.
● Good mechanical properties. Direct impact is 50kgs, even can pass in-direct impact. Bending performance is good, the panel can be folded in half.
● No yellowing. The surface is smooth and delicate, much better than B68.
● Good compatibility, C68 and B68 baked in the same oven, will not affect each other.
● The formula cost is almost the same as B68.The dosage of C68 is bigger, but its unit price is lower than B68.
C68 Matting agent
L88 Leveling agent
L701 Gloss enhancer
150℃*30min / 180℃*15min